/uploads/images/logo/logo-taiyo-removebg-preview.png

Diaphragm Pump (Bơm màng Taiyo)

ETD2 Series

Giá: Liên hệ

We would like to guide you the "Electric Diaphragm Pump ETD2 Series", as a new product from TAIYO. This "ETD2 Series" is designed at maximum flow up to 120 liter/min, that variation to the "ETD Series" lineup which is used widely at various fields and have received high appraisal from our customers. It contributes to the energy conservation by cutting running costs and emissions of carbon dioxide 

Thông tin chi tiết
Features  

 
The cut of running costs and emissions of carbon dioxide to approx. 80% of that of the conventional company products.
Contribution to energy saving by reducing running costs for equipment.
Enable to use in the clean environment with no exhaust and low-noise.
Stable output rate driven by electrical motor.
Wide range of flow rate can be adjusted by inverter control mechanism.
Add variations of flameproof and increased safety specification to the series.
 
Specifications  
Code Number ETD2-2004AT-17 ETD2-2004ST-17 ETD2-2004AT-11 ETD2-2004ST-11 ETD2-2507AT-17 ETD2-2507ST-17 ETD2-2515AT-11 ETD2-2515ST-11
Body Material Aluminum Alloy Stainless Steel Aluminum Alloy Stainless Steel Aluminum Alloy Stainless Steel Aluminum Alloy Stainless Steel
Diaphragm & Ball Material PTFE
Max. Output Pressure 0.4 Mpa
Port Size Rc 3/4 (20A) Rc 1 (25A)
Fluid Temperature Range 0 to +60 Celsius Degree
Ambient Temperature 0 to +40 Celsius Degree
Solid scope in the liquid Less than phi 2 mm
Power Supply 200V 50/60Hz 220V 60Hz
Motor Power 0.4 Kw 0.75 Kw 1.5 Kw
Rate Current * 2.0A 3.4A 6.2A
Protection Structure IP44 (Indoors) Totally-enclosed-fan-cooled Type
Insulation Grade Grade E
Working Frequency Range
Inverter Control
20 to 70Hz 30 to 70Hz 20 to 80Hz 20 to 100Hz
Output Rate per cycle *(60Hz, at output 0.4MPa) Approx. 0.15 Liter/min Approx. 0.16 Liter/min Approx. 0.43 Liter/min Approx. 0.44 Liter/min
> Select the pump up to 1.5 times the required flow rate.
> Please read the instruction manual well, and make sure not to use in the wrong method.
> Use the inverter and go with rpm control of the motor for flow adjustment. Do not close the valve and control the flow by the valve at the output piping side.
> Use below the max. output pressure and within the working frequency range. If you require using out of the range, please require as special case.
   
* This is the rated current of motor, use within the control range of inverter.
* The output flow per cycle is just a value for reference.
  It may change depend on the viscosity of the fluids.
>
0987824409